Cirencester Church

This scaffold was so the client could access the roof of the tower in the brewery for repairs.

This scaffold was built to a design, as the client wanted to eliminate any risk of fall from the outside of the building to the inside. The structure of the floor was not strong enough to support the scaffold as there was voids underneath. We spanned the width of the room so no weight was on the floor.

The scaffold was erected for a regular client, to carry out stone/masonry repairs.

This scaffold was for painting and decorating purposes.

This scaffold was built to design, a full scaffold all the way around this large building. This project had to be fully protected from adverse weather conditions.

This scaffold was erected so the client could install a new water sprinkler system across the whole recycling centre.

Scaffold on the front for painting and decorating.

Scaffold to every lift for stone and masonry repairs.

Scaffold for painting and decorating.

Scaffold to repair stones on a memorial piece.

Scaffold on a narrow lane for painting and decoration.

Scaffold built design, for stone and masonry repairs.

Haki roof built on this one to keep dry for continued work through the winter months.

Scaffold for general repairs and decoration.

Scaffold across a river to inspect/repair piping.

Client wanted to inspect the piping on this industrial unit.

Regular client wanted the scaffold for repointing and general decorating.

This was a on going project for the whole centre but this scaffold was for some remedial internal works.

Scaffold for a regular client, access for painting/decorating and led repairs.

Scaffold to all sides for a complete revamp on this one.

Small Layher staircase so the client could access and inspect the roof.

Scaffold was floor window repairs and re pointing.

Scaffold for painting and decorating.

Couple of towers for inspection of a leaking roof.

Scaffold for a regular client, a progressive new build of flats.

Another temporary roof.

Progressive new build for Hartpury college. For another regular client.

This scaffold was built to a design for a charity event at the top of the eagle tower in Cheltenham, the public would abseil of the edge of the scaffold down to the floor.

Scaffold for roof repairs.

This scaffold was erected all the way around this property for painting and decorating purposes and a roof inspection.

Small Layher scaffold for a regular client.

Scaffold for stone and masonry repairs.

Another tidy scaffold from the guys at Altitude.

Internal handrails for an ongoing build of new offices.

A Layher system staircase for another client.

New Doctors Surgery for a regular client.

A small site of new timber frame houses.

Flats completed for a regular client, this one is for windows and repointing. The front was built to design due to spanning over a large recessed porch.

A interesting shot of this project in Bristol, complete wrap around for stone repairs to the tower all built to design.

Internal scaffold all built to design, to accommodate heavy duty steels to be installed on the first floor.

Edge Protection handrails and loading bays around the whole warehouse for roof repairs.

This project was for general repairs to the whole building and roof.
A temporary roof to follow.

A progressive new build to a tricky shaped building and tight access.

This is phase 1 of this project, The whole of the tower block building is going to be Re Cladded.
The scaffold is all built to design. An 100m walkway and a wrap around the main building.

Layher scaffold built for a pantomime show.

Scaffold for windows and roofing on 2 blocks of flats.

Scaffold complete wrap around on this one for a full refurbish.

3 x Block of flats

Temporary Roof

Valley Bridge

Haki temporary roof.

Stone and roof repairs.

This scaffold was all built to design for re cladding, the towers on the roof are to attach cradles to the scaffold. (scaffold is in progress)